The remote control (continued)
Television operation
You can control televisions by changing the remote control code.
Preparation
≥Turn on the television.
≥Switch [DVD, TV] (15) to “TV”.
1Refer to the chart below for the code for your television.
2Press and hold [TV, Í] (14) and enter the
≥For example: 01, press [0] )[1].
≥After entering the code, test the remote control by turning on the television and changing channels.
Note
≥If there is more than one code, repeat the procedure until you find the code that allows correct operation.
≥Repeat this procedure after you change the batteries.
≥If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote is not compatible with your television.
List of TVs Compatible with the unit’s Remote Control
Brand: | Code |
Panasonic | 01, 02, 03, 04, 44 |
AIWA | 35 |
AKAI | 27, 30 |
BLAUPUNKT | 09 |
BRANDT | 10, 15 |
BUSH | 05, 06 |
CURTIS | 31 |
DESMET | 05, 31, 33 |
DUAL | 05, 06 |
ELEMIS | 31 |
FERGUSON | 10 |
GOLDSTAR/LG | 31 |
GOODMANS | 05, 06, 31 |
GRUNDIG | 09 |
HITACHI | 22, 23, 31, 40, 41, 42 |
INNO HIT | 34 |
IRRADIO | 30 |
ITT | 25 |
JVC | 17, 39 |
LOEWE | 07 |
METZ | 28, 31 |
MITSUBISHI | 06, 19, 20 |
MIVAR | 24 |
NEC | 36 |
NOKIA | 25, 26, 27 |
NORDMENDE | 10 |
ORION | 37 |
PHILIPS | 05, 06 |
PHONOLA | 31, 33 |
PIONEER | 38 |
PYE | 05, 06 |
RADIOLA | 05, 06 |
SABA | 10 |
SALORA | 26 |
SAMSUNG | 31, 32, 43 |
SANSUI | 05, 31, 33 |
SANYO | 21 |
SBR | 06 |
SCHNEIDER | 05, 06, 29, 30, 31 |
SELECO | 06, 25 |
SHARP | 18 |
SIEMENS | 09 |
SINUDYNE | 05, 06, 33 |
SONY | 08 |
TELEFUNKEN | 10, 11, 12, 13, 14 |
THOMSON | 10, 15 |
TOSHIBA | 16 |
WHITE WESTINGHOUSE | 05, 06 |
Operation: | Button |
On and off: | [TV, Í] (14) |
Video input mode: | [AV] (3) |
Channels: | [W, X, CH] (18) |
Volume: | [i, j, VOLUME] (19) |
Numeric: |
ªThe 3 methods for switching to the AV input on your
Panasonic TV
Your Panasonic TV uses one of 3 different methods for switching between TV reception and the AV input(s). Perform the operations steps listed for the switching methods A, B and C below to determine which one your Panasonic TV uses.
A
1)Switch [DVD, TV] (15) to “TV”.
2)Press [AV] (3) to switch to the AV input.
Each press of [AV] (3) switches between “TV reception” and “AV input(s)”.
B (for the remote control code No.44)
1)Switch [DVD, TV] (15) to “TV”.
2)Press [AV] (3).
Colour bars for selecting the AV input appear on the TV screen.
3)Follow the instructions displayed on the TV screen to select the desired AV input from the displayed colour bars for the AV input by pressing [A] (29), [B] (28), [C] (33) or [D] (34) on the remote control.
C (for the remote control code No.01)
1)Switch [DVD, TV] (15) to “TV”.
2)Press [AV] (3).
The last previously selected AV input indication appears on the TV screen. The indications for selecting another AV input also appear, but they disappear a few seconds later.
3)Before the indications for selecting another AV input disappear, press [A] (29), [B] (28), [C] (33) or [D] (34) to select the desired AV input.
With the following four buttons, you can move and select as follows:
[A](29): Move left
[B](28): Move down
[C](33): Move up
[D](34): Move right
9
