Panasonic Generation Plasma Display Television manual Driver Setup Adjustment

Driver Setup Adjustment

Driver Set-up

Item / Preparation

1.Input a white signal to one of the unit’s video input.

2.Set the picture controls as follows: Picture menu: Vivid

Normal: Set

Aspect: Full

Caution

1.Perform the Vsus adjustment.

2.Confirm the voltage level of VSCN. This should be done after the adjustment of Vad which should be -105V

When Vad = -105V, Vscn voltage is 35V

±4V.

Note: See the panel label for voltages that are not listed in the service manual.

96