PRECAUTIONS
•Do not attempt to disassemble the camera or the camera control unit.
To prevent electric shock, do not remove screws or cover. There are no
•Do not expose the camera or camera control unit to rain or moisture, or do not try to operate it in wet conditions.
Take immediate action if the camera or camera con- trol unit becomes wet. Turn power off and refer ser- vicing to qualified service personnel.
Moisture can damage the camera and camera con- trol unit and can cause electric shock.
•Ambient Temperature range
Do not install the camera in the place where the temperature is beyond
•Never crush or pinch the camera cable.
Don't wind or bend the camera cable into a small circle.
•Never face the camera toward the sun, whether in use or not.
Use caution when operating the camera in the vicin- ity of spot lights or other lights and light reflecting apparatus.
•Maintenance
After pressing the DC Power ON/OFF switch off, clean it with a dry cloth. If it is difficult to clean it of dirt or dust, use a cloth with detergent.
Use the lens cleaning tissue paper (may be avail- able at your local camera store) for lens cleaning.
•Connect this to a DC12V, CLASS 2 power supply only.
•After using the camera, turn off the DC Power ON/OFF Switch and put the lens cap on the camera head.
•Connect together only the camera head and the camera control unit which are packed in the same box (a pair). Otherwise it may cause improper oper- ation.
•Every necessary procedures with regard to installa- tion should be made by qualified service personnel or system installer.
Caution:
Connecting or disconnecting camera cable to/from the camera control unit or the camera must be done after turning the DC Power ON/OFF Switch to the OFF position. Failure to do this may damage the camera head.
