![](/images/new-backgrounds/1141062/14106217x1.webp)
PREPARATION
Caution: Keep the DC Power ON/OFF switch of the camera control unit in the OFF position through the installation.
Camera Head with
1.Remove the body cap of the camera and confirm that the surface of the optical filter of the camera head is clean.
Body Cap
If the surface of the optical filter is not clean, use a blower brush or lens cleaning tissue.
2.Rotate the focus lock ring fully clockwise.
Mount the Pinhole Lens,
Focus Lock Ring
Camera Head with GP-AD22TA and optional C-mount lens
1.Remove the body cap of the camera head and con- firm that the surface of the optical filter of the cam- era head is clean.
Body Cap
If the surface of the optical filter is not clean, use a blower brush or lens cleaning tissue.
2.Attach the optional
3.Rotate the focus lock ring fully.
Mount the lens and
Focus Lock Ring
Caution: If the optional