Panasonic H-FS014042 Names and Functions of Components, Reverse the lens hood and then attach it

2Reverse the lens hood and then attach it

in the same way as shown previously.

• When taking pictures with the flash with the lens hood attached, the lower portion of the screen may turn dark (vignetting effect) and the control of the flash may be

disabled because the photo

flash may be obscured by the lens hood. We recommend detaching the lens hood.

•When using the AF assist lamp in the dark, detach the lens hood.

∫Attaching Filters

≥Vignetting may occur if using 2 or more MC protectors (optional:DMW-LMC52),

PL filters (optional:DMW-LPL52) or ND filters (optional:DMW-LND52), or if using thick protectors and/or filters.

≥The filter may become impossible to remove if excessively tightened, so please refrain from tightening it too much.

≥It is possible to attach the lens cap with the filter already attached.

≥You cannot attach a conversion lens or adaptor to this lens. A filter may be used, but attaching any other element may cause damage to the lens.

8

Names and Functions of Components

∫Lens

1 2 3 4 5

1Lens surface

2Focus ring

Rotate to focus when taking pictures with manual focus.

3Zoom ring

Rotate the zoom ring when you wish to take large (tele) or wide (wide angle) pictures. (35 mm film camera equivalent: 28 mm to 84 mm)

VQT2U00