Names and Functions of Components
1 | 2 | 3 | 4 | 5 | 6 | 7 |
1Lens surface
2Aperture ring
Rotate this to adjust the aperture value.
≥If you set the camera to
≥If you set the position of the aperture ring to [A], the aperture value of the camera will be enabled.
3Focus ring
Rotate to focus when taking pictures with manual focus (MF).
6
4[AF/MF] switch
This allows you to switch between Auto Focus (AF) and Manual Focus (MF). If you set [MF], you can use the focus ring to adjust the focus.
≥When either the [AF/MF] switch of the lens or the setting of the camera is set to [MF], Manual Focus (MF) is enabled.
5[O.I.S.] switch
When the lens is attached to the camera the stabilizer function is set to activate if the [O.I.S.] switch is set to [ON].
≥We recommend setting the [O.I.S.] switch to [OFF] when using a tripod.
≥The stabilizer function may not be effective in the following cases.
–When there is a lot of jitter.
–When taking pictures while following a moving subject.
–When using the digital zoom.
–When the shutter speed becomes slower to take pictures indoors or in dark places.
6Lens fitting mark
7Contact points
Note
≥If you tilt the lens, the lenses inside may move. This is not a malfunction.
≥If you turn off the camera, the aperture will be set to a reduced value.
VQT5E43 (ENG)
