42
VQT3Y04
When about 30minutes have passed without any operation while connecting the AC adaptor
with this unit, the unit automatically turns off.
≥This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in
following cases:
jUsing the USB cable for PC etc.
jPRE-REC is used
jDuring playback of the slide show
This unit is put into recording pause approx. 0.6seconds after the LCD monitor is reopened.
≥When in Quick Start Standby Mode about 40% of the power used in Recording pause
mode is being consumed, so the recording time will be reduced.
≥
Quick Start will not work if there is no SD card inserted.
≥
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there
is no SD card inserted.
≥Change the mode to .
1 Set [QUICK START] to [ON].
2 Close the LCD monitor.
The status indicator A flashes green and the unit
goes into Quick Start Standby Mode.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put
into recording pause.
≥Quick Start Standby Mode is canceled if
jabout 5 minutes have elapsed
jmode is set to
≥It may take some time for Automatic White B alance to adjust.
≥In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥When it has gone into Quick Start Standby Mode automatically with the [ECONOMY
(BATT)] (l41)/[ECONOMY (AC)], close the LCD monitor once and open it again.
≥Turn the unit off using the power button.
[ECONOMY (AC)] [ON]/[OFF]
[QUICK START] [ON]/[OFF]
HC-V100&V100MP_PC_PU_VQT3Y04_mst.book 42 ページ ２０１２年１月５日 木曜日 午前１０時２０分