95
VQT3Y04
∫To disconnect USB cable safely
Select the icon in task tray displayed on the PC, and then click [Eject Panaso nic
Camcorder].
≥Depending on your PC’s settings, this icon may not be displayed.
∫Charging the battery by connecting it to different devices
When using the battery, if you turn off th e uni t and connec t it t o a PC, Panas onic Blu -ray dis c
recorder or Panasonic DVD recorder, the battery will charge.
≥When connecting this unit to a PC for the first time, make sure to connect this unit to
the PC with this unit turned on.
≥Insert the USB cable securely all the way. It will not operate properly if it is not inserted all
the way.
≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
≥Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.
≥During charging, the status indicator flashes.
≥You cannot charge when the status indic a tor fla sh es rap idly, or when it does not light at all.
Charge using the AC adaptor. (l21)
≥It will take 2 or 3 times longer to charge compared to when using the AC adaptor.
≥If the status indicator flashe s at a particularly fast or s low rate, refer to page 111.
About the screen indication of the unit
≥Do not disconnect the USB cable, the battery, or the AC adaptor while the access lamp
is on or card access icon ( ) appears on the unit screen.
≥
Do not disconnect the USB cable, the battery or the AC adaptor while the access lamp
is on or built-in memory access icon ( ) appears on the unit screen.
≥If the screen does not change when the unit is operated while connected to a PC,
disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect the
battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit
back on. (Data may be destroyed when above operation is performed while accessing
the SD card or built-in memory.)
HC-V100&V100MP_PC_PU_VQT3Y04_mst.book 95 ページ ２０１２年１月５日　木曜日　午前１０時２０分