84
VQT3Y04
3Select the media you wish to dub, then press the ENTER button.
≥When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor
button to turn the LCD monitor on.
4Dub through operations on the Blu-ray disc recorder or high-
definition (AVCHD) compatible DVD recorder .
≥Do not press the ENTER button of the unit during dubbing.
≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
≥When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder usin g
a USB cable while the unit is turned on, power is also supplied from the connected
equipment to this unit.
≥For details on dubbing and playback methods, read the operating inst ructions of the
Blu-ray disc recorder or DVD recorder.
≥When you connect the unit to a Blu-ray disc recorder, a dubbing operat ions screen may
appear on the television connected to the Blu-ray disc recorder. In this case as well,
perform the operations of
Step
s 1 to 4.
≥You cannot change the mode of the unit or turn of f the unit while it is connec ted to a Blu- ray
disc recorder or DVD recorder. Disconnect the US B cable b efore per forming either of these
operations.
≥If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc
recorder to cancel the dubbing.
About the screen indication of the unit
≥When the unit is accessing the SD card, card access icon ( ) appears on the unit
screen or the access lamp is on.
≥
When the unit is accessing the built-in memory, built-in memory access icon ( )
appears on the unit screen or the access lamp is on.
≥Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is
accessing media, as this may result in the loss of recorded content.
HC-V100&V100MP_PC_PU_VQT3Y04_mst.book 84 ページ ２０１２年１月５日 木曜日 午前１０時２０分