72
VQT3Y04
Dividing a scene to partially delete (iFrame)
Divide the iFrame scene, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes that were deleted after division cannot be recovered.
≥Change the mode to , and set [VIDEO/PICTURE] of the play mode selection to
[iFrame]. (l36)
1Select the menu.
2Select the scene you wish to divide using the cursor button and
press the ENTER button.
3Select to set the dividing point.
≥It is convenient to use Slow-motion Playback and
Frame-by-frame Playback. (l63)
≥Set to at least 2 seconds for the portions to be
deleted and at least 3 seconds for the portion that
is to remain.
4Select the part for deletion, then press the ENTER button.
5Select [YES] and press the ENTER button to confirm (play back) the
part for deletion.
≥A confirmation message appears when [NO] is selected.
Proceed to
Step
7.
6Stop the playback.
≥A confirmation message appears.
7Select [YES] and press the ENTER button.
≥To continue dividing and deleting other scenes, repeat
Step
s 2-7.
To complete dividing
≥Press the MENU button.
≥It may not be possible to divide scenes with a short recording time.
≥The actual division may slightly slip off the previously designated dividing point.
: [EDIT SCENE] # [SPLIT&DELETE]
0h00m15s0h00m15s0h00m15s
HC-V100&V100MP_PC_PU_VQT3Y04_mst.book 72 ページ ２０１２年１月５日 木曜日 午前１０時２０分