80
VQT3Y04
Motion pictures or still pictures recorded with this unit can be copied from a built-in memor y to
an SD card inserted in this unit.
∫Check the used space of the SD card
It is possible to check the used space of the SD card by [MEDIA STATUS] (l45).
≥Depending on the media condition, some remaining capacity of the SD card may not be
used.
≥If the remaining capacity on a single SD card is not enough, you can copy to multiple SD
cards following the instruction on the screen. In this case, the last scene copied to an SD
card is automatically divided to fit t h e spac e on the SD card.
≥If you divide the scenes (l71), and copy by scene selection, it is possible to copy
matching the remaining capacity of the SD card, or only the necessary parts.
≥If there is not much remain ing capacity in the SD card, a confirmation message aski ng to
copy after deleting all data on the SD card is displayed. Be aware that deleted data ca nno t
be restored.
1Change the mode to .
≥Use a sufficiently charged battery or the AC adaptor .
2Select the menu.
3Following the screen display, select the desired item using the
cursor button, and press the ENTER button.
≥Select and press the ENTER button to return to the previous screen.
≥(When [SELECT SCENES] is selected)
When you press the ENTER button, the scene/still picture is selected and indication
appears on the thumbnail. Press the ENTER button again to cancel the operation.
≥(When [SELECT DATE] is selected)
When you press the ENTER button, a date is selected and surrounded by red. Press the
ENTER button again to cancel the operation.
≥Up to 99 scenes/still pictures or 99 dates can be set in succession.
≥If 2 or more SD cards are necessary to copy, change the card following the instructions on
the screen.
4Press the MENU button when the copy complete message is
displayed.
≥The thumbnail view of the copy destination is indicated.
Copy/Dubbing
Copying from Built-in Memory to SD card [HC-V100M]
Copying
: [COPY]
HC-V100&V100MP_PC_PU_VQT3Y04_mst.book 80 ページ ２０１２年１月５日 木曜日 午前１０時２０分