Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 23) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the access lamp has gone off.
Access lamp [ACCESS] A
≥ When this unit is accessing the SD card, the access lamp lights up.
1 Open the SD card cover and insert (remove) the SD card into (from) the card slot B.
≥Face the terminal side C in the direction shown in the illustration and press it straight in as far as it will go.
≥Press the center of the SD card and then pull it straight out.
2 Securely close the SD card cover.
≥Securely close it until it clicks.
Preparation
Turning the unit on/off
You can turn the unit on and off using the power button or by opening and closing the LCD monitor.
Turning the unit on and off with the power button
Open the LCD monitor and press the power button to turn on the unit.
| To turn off the unit |
Hold down the power button until the status | |
| indicator goes off. |
AThe status indicator lights on.
The unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.
15
(ENG) SQT0003
