AUDIO IN SET UP menu
Key | Key designation |
| Description |
F1 | INT SG MD | For selecting the internal audio test signal. | |
|
| TONE: | Reference level sinusoidal waves are output. |
|
| SILENCE: A signal tone is not output. (Mute signals are output.) | |
|
|
|
|
|
| ||
F6 | PEAK HOLD | For holding the peak recording and playback levels on the | |
| For setting the peak hold. | display. |
|
|
| ON: Peak level is held. | |
|
| OFF: Peak level is not held. | |
|
|
| |
F7 | SCALE | For switching the scale of the audio level meter on display to | |
| For switching the level | standard scale or fine scale. | |
| meter scale. | FINE: Scale in 0.2 dB incremens. (j24dB to j15dB) | |
|
| FULL: Standard scale (j¶ to j0dB) | |
|
| Refer to “Switching the audio level meter scale” (on this page). | |
|
|
| |
F8 | EXIT | Returns the VTR to the AUDIO IN menu screen. | |
F9 | DATA ADV°1 |
| |
|
| The amount by which the data is to be advanced when the | |
|
| digital audio input/output format is in the data mode can be set | |
|
| in increments of 1/10th of a frame. (When “0” is set, the | |
|
| amount is set to the default setting inside the VTR.) | |
|
|
| |
F10 | STYLE° | This menu item can be set by pressing the F10 key together with | |
| For setting the digital | the F key. | |
| audio input/output data | PCM: The format is set to the regular PCM audio mode. | |
| format. | DATA: The format is set to the data mode (compressed audio: | |
|
|
| |
|
| ||
°1The data mode is operational only in the
°1The data advance amount and data style can be set on both the AUDIO IN SETUP menu and AUDIO OUT SETUP menu. If the setting is updated on one menu, it will be updated on the other menu as well. Furthermore, these settings cannot be performed on a channel by channel basis.
°2“Dolby” and the
∑Switching the audio level meter scale
≥If the audio level is adjusted below j24 dB in the FINE mode, the ; mark is displayed; if it is adjusted above j15 dB, the : mark is displayed.
– 54 –
