TC/CHR menu
∑Changing the superimposing position
(1)Move the position using the cursor keys.
Center cursor key
Cursor keys 
≥When a cursor key is held down, the cursor will move more quickly.
≥When the center cursor key is pressed, the superimposing re- turns to its initial position.
∑Time code displays and VTR’s operating modes
Display the time codes and VTR’s operating modes as required.
Time code displays |
|
|
CTL1: Control signal 1 | TCG: | Value generated by time code generator |
CTL2: Control signal 2 | LUBG: Value of LTC user bit generated | |
LTCR: LTC time code readout value | VUBG: Value of VITC user bit generated | |
LUBR: LTC user bit readout value | EXTC: External time code value | |
VTCR: VITC time code readout value | EXUB: External user bit value | |
VUBR: VITC user bit readout value |
|
|
≥The colon (“:”) between the seconds and frames denotes the readout mode of the time code reader.
Hours | Minutes |
| Seconds |
| Frames | |||
; | ; | ; |
| ; |
|
|
| |
∑∑ | : ∑∑ | : ∑∑ | : | ∑∑. <Blinking display: Time code cannot be read out. | ||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| ||
|
|
|
|
| [ ]: First field | |||
|
|
|
|
| [. ]: Second field | |||
|
|
|
|
|
| |||
|
|
|
| [: ]: Time code can be read out or TCG value is displayed. | ||||
|
|
|
| [ | ]: Time code cannot be read out. | |||
|
|
|
|
|
|
|
|
|
[. ]: DF mode ON
[: ]: DF mode OFF
– 73 –
