Panasonic HD3700H operating instructions Field, FRAME11, Fine, Coarse

HOME SET UP menu

Key	Key designation		Description
F1	SYNC PLY	Automatically compensates for the start initiated for the playback
	Sync play.	mode. For instance, when the VTR is set to the playback mode
		from the preroll point, it synchronizes its own phase to ensure
		that the tape arrives at the IN point after the preroll time has
		elapsed. (The function takes effect only when the front panel
		controls are used for operation.)
		ON: Sync play function operates.
		OFF: Normal playback is assumed.
F2	AT PLY	FIELD:	Plays the tape field by field.
	For switching the playback	FRAME1°1/
	picture in JOG/VAR.	FRAME2°2: Plays back on a frame by frame basis at the j1a to
			i1a speed and on a field by field basis at all other
			speeds. If the tape material image has a scene
			cutoff when moving from No. 2 field to No. 1 field,
			as when editing with the No. 1 field as cutoff, use
			FRAME 1.
			Use Frame 2 when the No. 2 field is the scene
			cutoff.
F3	PRG PLAY	Selects the variable step for program play.
	Program play.	FINE:	0.1% step
		COARSE:	1.0% step
F4	PRG PLAY	Normal playback occurs at variable speed within the range of
	Program play.	n5% with the variable step of the F3 key.
		Refer to “Programmed play function”.
F5	CAP LOCK°3	Selects the capstan servo lock mode during playback.
	For setting the capstan	4F AUTO (8F AUTO: 1080/23p, 1080/24p, 1080/50i):
	servo lock	Assumes color frame auto lock mode. If there is any discontinuity
		in the color frame during playback, the unit locks again at a new
		color frame.
		4F FORCE (8F FORCE: 1080/23p, 1080/24p, 1080/50i):
		Assumes color frame forced lock mode. If there is any
		discontinuity in the color frame during playback, the unit
		preserves the field sequence at initial lock.
		2F: Assumes frame lock mode.
		≥The capstan servo lock mode can be set in AUTO (or
		MANUAL) EDIT SET UP menu. If the two settings differ, priority
		is given to the final mode setting.
F6	TAPE MD.	HD.STOP: Stops the drum when the tape is loose.
	Tape mode when the VTR	HLF LOAD: Half-loads the tape.
	is in standby OFF.
F7	——
F8	EXIT	Returns the VTR to the HOME menu screen.

°1 This item is not displayed when the 720/59p mode has been selected.

°2 This item does not funtion when the 720/59p, 1080/23Psf or 1080/24Psf mode has been selected.

°3 ONoteN

In the 1080/59i mode, the factory setting for this item is 2F. In the 1080/23p mode, it is 8F AUTO. The fact that the factory setting differs depending on the format should be borne in mind when one format is converted into another.

– 18 –