- 116 -
3/
Touch the media you wish to dub.
≥When using the battery, the LCD monitor turns off after about 5seconds. Touch the screen
to turn the LCD monitor on.
4Dubbing through operations on the Blu-ray disc recorder or high-
definition (AVCHD) compatible DVD recorder.
≥/
Do not touch [CHANGE MEDIA] on the screen of the unit during dubbing.
≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
≥For details on dubbing and playback methods, read the operating instructions of the
Blu-ray disc recorder or DVD recorder.
≥When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may
appear on the television connected to the Blu-ray disc recorder. In this case as well,
perform the operations of steps 1 to 4.
≥You cannot change the mode of the unit or turn off the unit while it is connected to a Blu-ray
disc recorder or DVD recorder. Disconnect the USB cable before performing either of these
operations.
≥If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc
recorder to cancel the dubbing.
About the screen indication of the unit
≥When the unit is accessing the SD card, card access icon ( ) appears on the unit
screen or the access lamp is on.
≥
When the unit is accessing the built-in memory, built-in memory access icon ( )
appears on the unit screen or the access lamp is on.
≥
When the unit is accessing the HDD, HDD access icon ( ) appears on the unit
screen or the HDD access lamp is on.
≥Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is
accessing the media, as this may result in the loss of recorded content.
HDC-TM900
HDC-HS900
HDC-TM900
HDC-HS900
HDC-TM900
HDC-HS900