Panasonic HDC-TM900, HDC-HS900, HDC-SD900 operating instructions Wind Noise Canceller, MIC Setup

[WIND NOISE CANCELLER]

This will reduce the wind noise coming into the built-inmicrophones while maintaining the realism.

≥Switch to manual mode. (l 75)

MENU : [RECORD SETUP] # [WIND NOISE CANCELLER] # [ON]

≥This function’s default setting is [ON].

≥When switching to intelligent auto mode, [WIND NOISE CANCELLER] is set to [ON], and the setting cannot be changed.

≥You may not see the full effect depending on the recording conditions.

≥If wind sound cannot be reduced with the wind noise canceller function alone, set [BASS SETTING] to [LOWCUT]. (l 69)

[MIC SETUP]

Recording setting of the built-in microphone can be adjusted.

≥Switch to manual mode. (l 75)

MENU : [RECORD SETUP] # [MIC SETUP] # desired setting

[SURROUND]: Sound is recorded with 5.1 ch surround microphone.

[ZOOM MIC]: Directivity of the microphone is interlocked with the zoom operation. Sounds near the front of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are recorded more realistically if you zoom out (wide angle).

[FOCUS MIC]: Directivity of the centre is enhanced for recording audio near the front of the unit more clearly.

[STEREO MIC]: Sound from two directions is recorded in 2 ch by forward-facing stereo microphones.

≥If you wish to record higher quality sound and maintain realism even when zooming in, for instance recording a music recital, we recommend setting [MIC SETUP] to [SURROUND].

≥If you have an external microphone connected when recording in [iFrame], [MIC SETUP] is set to [STEREO MIC] automatically.

- 67 -