Panasonic HDC-HS900 Bass Setting, Picture Adjust, Zebra, Touch the desired setting items

[BASS SETTING]

Change the lower setting of the built-in microphone according to your choice.

≥Switch to manual mode. (l 75)

MENU : [RECORD SETUP] # [BASS SETTING] # desired setting

[0dB]/[+3dB]/[+6dB]/[LOWCUT]

≥Normally set to [0dB].

≥Select [+3dB] or [+6dB] to get strong power feeling at bass level.

[PICTURE ADJUST]

Adjust the quality of the image while recording.

Adjust by outputting to a TV while adjusting the quality of the image.

≥This setting is retained when you change between motion picture recording mode and still picture recording mode.

≥Switch to manual mode. (l 75)

1 Select the menu.

MENU : [RECORD SETUP] # [PICTURE ADJUST]

2 Touch the desired setting items.

[SHARPNESS]:	Sharpness of the edge
[COLOUR]:	Depth of the colour of the image
[EXPOSURE]:	Brightness of the image
[WB ADJUST]:	Picture colour balance

3Touch / to adjust settings.

4Touch [ENTER].

≥Touch [EXIT] to complete the settings.

≥ appears on the screen.

[ZEBRA]

Parts where white saturation (colour saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern).

≥ Switch to manual mode. (l 75)

MENU : [RECORD SETUP] # [ZEBRA] # [ON]

≥ It is possible to set from the quick menu in manual

mode. (l 35)

A Zebra pattern

≥You can record an image with little white saturation if you manually adjust the shutter speed or brightness (iris/gain) (l 77).

≥The zebra pattern does not appear on the images actually recorded.

-69 -