- 129 -
Connect this unit to the PC after the software applications are installed.
Remove the supplied CD-ROM from your PC.
AUSB cable (supplied)
Insert the plugs as far as they will go.
1Connect this unit to the AC adaptor.
It is possible to use it connected to the PC with the batteries only, but you will not be able to
write data into the unit. Use the AC adaptor to free you from worrying about the battery
running down.
Connect with the AC adaptor when using the Conversion assist function.
2Turn on the unit.
This function is available in all modes.
3Connect this unit to a PC.
The USB function selection screen will appear.
4Touch [PC] on the screen of this unit.
The Smart wizard screen is automatically displayed when HDWriter AE 3.0 is installed.
This unit is automatically recognised as an external drive of the PC. (l131)
When you select an option other than [PC], reconnect the USB cable.
When using the battery, the LCD monitor turns off after about 5seconds. Touch the screen
to turn the LCD monitor on.
With a PC
Connecting to a PC