61
VQT3U98
Adjusting the audio input level
∫Adjusting the input level of the built-in microphone (5.1 ch)
≥Set the [MIC SETUP] to anything other than [2ch]. (l57)
1Select the menu.
2(When [SET]/[SETr] is selected)
Touch / to adjust the microphone
input level.
≥Touch to activate/disactivate ALC. When A LC is
activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When
ALC is disactivated, natural recording can be
performed.
≥Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the
sound is distorted.) Select a lower setting for
microphone input level.
3Touch [ENTER] to set the microphone
input level and then touch [EXIT].
≥ is displayed on the recording screen when the ALC is turned on.
≥When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom
rate.
≥You cannot record with the audio completely muted.
: [RECORD SETUP] # [5.1chMIC LEVEL] # desired setting
[AUTO]: ALC is activated, and the recording level is adjusted
automatically.
[SET]/[SETr]: The desired recording level can be set.
MENU
ACenter
BFront left
CBack left
DFront right
EBack right
FMicrophone input level
HDC-Z10000P-VQT3U98_mst.book 61 ページ 2011年10月4日 火曜日 午後3時2分