Panasonic HM-TA1 operating instructions Inserting/removing an SD card, Status indicator A

≥4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards that do not have the SDXC logo are not based on SD Memory Card Specifications.

≥ When the write-protect switch A on SD card is
locked, no recording, deletion or editing will be
possible on the card.	32
≥ Keep the Memory Card out of reach of children to

prevent swallowing.

Inserting/removing an SD card

When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card.

(l 35) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored.

Caution:

Check that the status indicator has gone off.





Status indicator A

≥When this unit is

	accessing the SD card,
	the status indicator
	lights up.

1Open the card/battery door and insert (remove) the SD card into (from) the card slot B.

≥Face the label side C in the direction shown in the illustration and press it straight in as far as it will go.

≥Press the centre of the SD card and then pull it straight out.

2Securely close the card/battery door.

≥Do not touch the terminals on the back of the SD card.

≥Do not apply strong shocks, bend, or drop the SD card.

≥Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the data stored on the SD card.

16VQT3A10