the call is logged in the caller list
(page 32) with after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call barred list.
Important:
RYou must store the phone number with an
area code in the call barred list.
nFrom the caller list:
1MCN ( )
2MbN: Select the entry to be barred. a
MN a M N
3MbN: “Save CID” a MOKN
4MbN: “Caller Barred” a MOKN
5MbN: “Yes” a MOKN a MeN
nBy entering phone numbers:
1MN (right soft key) #217 a
MN
2Enter the phone number (24 digits
max.). a MOKN
RTo erase a digit, press MCN.
3MeN
Viewing/editing/erasing bar call
numbers
1MN (right soft key) #217
2MbN: Select the desired entry.
RTo exit, press MeN.
3To edit a number:
M N a Edit the phone number. a
MOKN a MeN
To erase a number:
MN a MbN: “Yes” a MOKN a MeN
Note:
RWhen editing, press the desired dial key to
add, MCN to erase.
Storing an area code to be
deleted automatically
In some situations, phone numbers stored
automatically in the caller list (page 32) will
include area codes. If you do not want to dial
the area code when making calls from the
caller list, you can store the area code which
you want the unit to delete automatically.
Example: You have stored the area code
“123”. If you make a call from the caller list to
the phone number “123-456-7890”, the unit
dials “456-7890”.
1MN (right soft key) #255
2Enter an area code (5 digits max.). a
MOKN a MeN
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1MN (right soft key) #256
2Enter the base unit PIN (default: “0000”).
RIf you forget your PIN, contact an
authorised service centre.
3Select the handsets to be restricted by
pressing 1 to 6.
RAll handsets registered to the base unit
are displayed.
R“” is displayed next to the selected
handset numbers.
RTo cancel a selected handset, press
the same dial key again. “ ”
disappears.
4MOKN
5Select a memory location by pressing 1
to 6. a MOKN
6Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
MeN
RTo erase a restricted number, press
MCN.
28
Programming
TG786xAL(en)_0111_ver002.pdf 28 2013/01/11 11:36:21