Nikon D2Xs manual Image Authentication, 231, Network Settings, Image Transfer, Copies

Network Settings

Adjust network settings for connection to the server. Press the multi selector up or down to highlight an option and then press the multi se- lector to the right.

OptionDescription

Menu Guide—

Load

settings file?

Wireless

TCP/IP

FTP

Load Wireless, TCP/IP, and FTP set- tings from camera memory card.

Adjust settings for connection to wire- less network.

Adjust TCP/IP settings, including IP ad- dress, DNS, and gateway settings.

Enter password and user ID and adjust settings for connection to ftp server.

The Setup Menu

Image Authentication

Selecting On for this option embeds image au- thentication information into photographs as they are taken, allowing alterations to the image to be detected using Nikon’s optional Image Authenti- cation software ( 250). To turn image authenti- cation on or off, highlight Image authentication

in the setup menu ( 213) and press the multi selector to the right. Press the multi selector up or down to highlight an option and press the multi selector right to select. Photographs taken with image authentication on are marked by a icon on page 2 of the playback information display ( 139).

Image Transfer

Modifications to color profiles or IPTC information made in PictureProject during transfer will be detected by Nikon’s Image Authentication software. Turn auto embed options off when transferring photographs for use with Image Authentication. Image authentication information is not embedded in TIFF photographs recorded directly to a computer using Camera Control Pro (available separately).

Copies

Image authentication information is not embedded in copies created with Trim ( 123) or Image overlay (118).

231