Menu Guide—The Setup Menu

Save/Load Settings

Select Save settings to save all camera settings except the date and time ( 17) and monitor brightness ( 215) to the camera memory card. Saved settings can be restored by selecting Load settings. To turn save or load settings, highlight Save/load settings in the setup menu ( 213)

and press the multi selector to the right. Press the multi selector up or down to highlight an option and press the multi selector right to select. Note that this option is unavailable when no memory card is inserted in the camera. The Load settings option will be unavailable if the current memory card does not contain saved settings.

Firmware Version

To display the current camera firmware version, highlight Firmware version in the setup menu ( 213) and press the multi selector to the right. Press the multi selector to the left to return to the setup menu.

Saved Settings

Settings are saved to a file named “NCSETUP0” on the camera memory card. Deleting or modifying this file will prevent the camera from loading the saved settings.

232

Page 246
Image 246
Nikon D2Xs manual Save/Load Settings, Firmware Version, 232, Saved Settings