Glows Glows Glows
Blinks Off
maximum Glows Blinks
Charge lamps (green)
50% 80% 100%
Off
Off

Technical Notes—Specifications

Using the Charger

1 Plug the AC adapter plug into the battery charger.

2 Plug the wall plug into a power outlet. The charge and calibration lights will remain off.

3 Insert the battery (terminals first), aligning the end of the battery with the guide and then sliding the battery in the direction indicated until it clicks into place. Charging will begin when the battery is inserted. The charge state is shown by the charge lamps:

Charge state

Less than 50% of maximum capacity

50–80% of capacity

More than 80% but less

than 100% of maximum Glows Glows Blinks capacity

100% of maximum capac- ity

4 When charging is complete, slide the battery out of the charger and un- plug the charger.

When the charger is not in use, replace the contact protector to prevent dust from accumulating on the charger contacts.

266

Page 280
Image 280
Nikon D2Xs manual 266, Using the Charger, Charge state