Nikon D2Xs manual Custom Settings, 179, Fine-Tuning Camera Settings, Group

Custom Settings

Fine-Tuning Camera Settings

Custom settings are used to fine-tune a variety of camera settings to suit the user’s preferences, creating combinations of settings that differ from the fac- tory defaults in effect at the time your camera was purchased. In addition to Custom Settings C (Bank select) and R (Menu reset), settings in the CSM (Custom Settings) menu are divided into the following six groups:

	Group	Custom Settings
a	Autofocus	a1–a8
b	Metering/exposure	b1–b7
c	Timers/AE&AF lock	c1–c5
d	Shooting/display	d1–d6
e	Bracketing/flash	e1–e8
f	Controls	f1–f8

Press the multi selector up or down to highlight the desired group and then press the multi se- lector to the right. The full list of Custom Settings a1–f8 will be displayed, starting with the settings in the selected group. To select a setting in a dif- ferent group, press the multi selector up or down

scroll until the desired setting is displayed, or press the multi selector to the left to return the top menu and select a different group. Custom Setting a1 (AF-C mode priority) and f8 (No CF card?) are linked: pressing the multi se- lector up when Custom Setting a1 is highlighted displays Custom Setting f8, while pressing the multi selector down while Custom Setting f8 is highlighted displays Custom Setting a1.

Using the Multi Selector

The multi selector can be used at any time when the monitor is on. The focus selector lock switch only takes effect when the monitor is off.

Menu Guide—Custom Settings

179