Menu Guide—Custom Settings

Custom Setting f4: FUNC. Button Press

This option controls the operation performed when the FUNC. button is pressed. Highlight f4 FUNC. button in the second level of the CSM menu ( 181) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection.

Option

Description

None

No operation is performed when FUNC. button is pressed.

(default)

 

If attached Speedlight supports Creative Lighting System (CLS), flash FV lock value locks when FUNC. button is pressed. Press again to cancel FV

lock.

Same as

AE-L/AF-L

Flash off

Bracketing

burst

Matrix

metering

Center-

weighted

Spot

metering

FUNC. button performs same functions as AE-L/AF-Lbutton.

Flash will not fire in photos taken while FUNC. button is pressed.

While FUNC. button is pressed, all shots in exposure or flash bracketing program will be taken each time shutter-release button is pressed. In continuous high-speed and continuous low-speed modes, camera will repeat bracketing burst while shutter-release button is held down. If white-balance bracketing is selected, camera will take photos at up to 8 fps (single or continuous high-speed mode) or 1–7 fps (continu- ous low-speed mode) and perform white balance bracketing on each frame.

Matrix metering activated while FUNC. button is pressed.

Center-weighted metering activated while FUNC. button is pressed.

Spot metering activated while FUNC. button is pressed.

208

Page 222
Image 222
Nikon D2Xs manual Custom Setting f4 FUNC. Button Press, 208, Lock, Same as