Connections—Connecting to a Computer

Connecting the USB Cable

1 Turn the computer on and wait for it to start up.

2 Turn the camera off.

3 Connect the UC-E4 USB cable as shown. Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard.

C IN

A/V

4 Turn the camera on. If Mass Storage is se- lected for USB, will be displayed in the rear control panel and viewfinder. The aperture display in the top control panel will also show , and the PC mode indicator will flash (if PTP is selected, the camera displays will only change when Camera Control Pro is running). Photographs can be transferred to the com- puter as described in the PictureProject Refer- ence Manual (on CD).

If Camera Control Pro is running, the top con- trol panel will show in place of the number

of exposures remaining. Any photographs taken will be recorded to the computer hard

disk rather than the camera memory card. See the Camera Control Pro User’s Manual for more information.

Do Not Turn the Camera Off

Do not turn the camera off while transfer is in progress.

236

Page 250
Image 250
Nikon D2Xs manual Connecting the USB Cable, 236, Do Not Turn the Camera Off