How to re-attach the sensor rollers
If the sensor rollers are removed,
∫
Attach the shorter sensor roller to the ADF door by placing the
≥Match the groove to the guide.
≥Push the roller, and confirm the sensor is locked by the springs on both sides.
∫Re-attach the sensor roller for front scanning
Attach the longer roller to the unit by placing the
≥ Match the groove to the guide.
≥Attach the side of the ADF door release first, and
attach the other side.
Confirm both new rollers move slightly.
≥Press down on the sensor rollers and rotate them.
32
