Component Identification
∫Power
1Turn on the power of the scanner.
≥Press the power switch. (The LED will now light.)
2Turn on the power of the host computer after scanner’s LED lights green.
≥In case of the USB connection, the host computer recognizes the scanner auto-
matically when the scanner is powered on | LED | |
even after the host computer is powered | ||
| ||
on. |
|
∫About LED
LED indicates the status of the scanner as follows:
LED light | Status |
|
|
Green | Ready to scan or scanning |
|
|
Green (flashing) | Sleep mode |
|
|
Orange | Ready to scan or scanning with warning *1 |
|
|
Orange (flashing) | Initializing |
| Sleeping with warning *1 |
|
|
Red | An error occurred *2 |
|
|
*1: The rollers need to be cleaned or replaced.
*1*2: Check the status of the scanner using the User utility. The User utility is included in the
15