How to re-attach the sensor rollers

If the sensor rollers are removed, re-attach them.

∫Re-attach the sensor roller for back scanning to the ADF door

Attach the shorter sensor roller to the ADF door by placing the non-gear side to the ADF door release.

≥Match the groove to the guide.

≥Push the roller, and confirm the sensor is locked by the springs on both sides.

Springs

∫Re-attach the sensor roller for front scanning

Attach the longer roller to the unit by placing the non-gear side to the ADF door release.

≥ Match the groove to the guide.

≥Attach the side of the ADF door release first, and

attach the other side.

Confirm both rollers move slightly.

≥Press down on the sensor rollers and rotate them.

32