Replacing Consumables
Remove the paper feed roller module |
| |
4 straightly, holding up the paper feed | Claw | |
case along the groove of the feed cover | Groove | |
to pull out the claw out of the case. | ||
|
Paper feed case
5 Install the new paper feed roller module with its gear on the right.
1Hang both ends of the paper feed
roller module.
2While slightly lifting the paper feed roller module, pass the claw along the groove of the feed cover.
3Attach the bearings at both ends of the paper feed roller module into the guide grooves of the chassis in the scanner.
.
Chassis
Bearings
Green levers
28