Cleaning the Unit

4 Pull the exit document stopper towards you, using your hand, pull the front door release towards you, then open the front door completely.

Front door

Front door

Front door release

Front door release

(Inside the front door )

Exit document stopper

5

Clean the scanning section glass, CIS

glass, sensor plate and sensor roller

using the accessory roller cleaning paper (KV-SS03).

Also, remove the dirt on the document sensors using the included blower.

• If the sensor roller is removed while cleaning, re-attach it after cleaning. (Refer to page 50 for re-attachmant.)

• There is no CIS glass and no sensor roller for the KV-S6050W/KV-S6050WU.

Document sensors

CIS glass

Sensor plate

Scanning section glass

Sensor roller

¥How to clean the document sensor Remove the brush and blow off the dirt through the document sensor hole or directly.

Blower

Document sensor

49