Replacing Consumable Roller Modules

8

Tilt the paper feed conveyor at a slight

angle pointing downward and attach it

as shown in the diagram to the right.

Hook

Pin

Please attach the left side hook in the same way.

9 Close the paper feed conveyor.

• Push up the paper feed conveyor until it clicks into place.

• You are now finished attaching the paper feed roller module and separation roller module.

To continue, replace the retard roller module according to the following procedure. (The retard roller module is located in the conveyor.)

Paper feed conveyor

10

Using your fingers, hold the conveyor

 

and pull it towards you to open it.

Retard roller module

 

• When the conveyor is pulled towards you,

 

 

the click-stop mechanism will be

 

 

released.

 

Document guide

Conveyor

55