32
Sending Faxes
STOP

FACE DOWN

Display
SET
1Insert the document FACE DOWN.
If necessary, press
or
repeatedly to
select the desired resolution (p. 28).
2Press .
Display:
3Press or until the following is
displayed.
4Press to start programming the
stations you want to transmit.
5Press or until the desired station
you want to transmit is displayed.
Example:
6Press .
To program other stations, repeat steps 5
and 6 (up to 20 stations).
7Press to start transmission to the
programmed stations.
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (p. 35).
SET
DIR=Bill [01]
SEND:PRESS SET
SET
Bill
6543210
DIR= [00]
NAVI.[+ -]A&ASET
SET
<ONE1TIME1BROAD>
PRESS SET
DIRECTORY[+ -]
<MAILBOX>H

One time broadcast transmission!

This feature is useful for sending the same document to selected parties only once. Select the
parties for each transmission.
Note:
If you select the “FINE”, “SUPER FINE” or
“PHOTO” resolution, the number of pages
that the unit can transmit will decrease.
If the document exceeds the memory capacity
(p. 85), sending will be canceled.
If one of the stations is busy or does not
answer, the station will be skipped. All
skipped stations will be redialed up to 2 times
after all of the other stations have been
called.
To cancel the broadcast setting
1. Press while the unit displays the following
message.
Display: 1BROADCASTING
STOP
The display will show the following.
2. Press .
SET
SEND1CANCELED?
YES:SET/NO:STOP