Tilt Angle Adjustment

4

3

2

1

The tilt angle of the operation board can be adjusted to one of four angles.

To lift: Lift up the operation board to the desired step-angle (12 3 4).

To set down: Lift up the operation board to the highest angle and then press down to step-angle 1. Be careful not to get your

fingers caught between the base and the operation board.

Pull down the handset hook until it locks to prevent the handset from slipping down from the operation board when at step-angle 4.

Wall Mounting

1 Set the operation board to step-angle 1.

3 Mount the unit on the wall.

83 mm

(3-1/4 in)

2 Connect the Ethernet cable, and then attach first and then of the wall mounting adaptor (included).

4 Pull down the handset hook until it locks, so the tab holds the handset.

To temporarily place the handset down during a conversation, hook it over the

top edge of the telephone as shown.

11

Page 11
Image 11
Panasonic KX-NT136 manual Tilt Angle Adjustment, Wall Mounting, Fingers caught between the base and the operation board