Operating the built-in answering device
Activating the answering device
light on/flash
1 Turn the 
(Auto answer) light on by pressing 
.
2 When receiving a call, a greeting message will be played and the unit will record a voice message.
●To record your own greeting message, see page 17.
Listening to recorded messages
When new messages are recorded, the 
(Auto answer) light will flash.
Press | to listen to recorded messages. |
After the messages are played back, the following will be displayed.
■ To erase the messages, press | . |
| |
ｻ ｲ ｾ ｲ ｼ ﾀ ﾖ ｳ ｹ ﾝ ｼ ｮ ｳ ｷ ｮ | |||
|
| ||
■ To save the messages, press | . | ｽ ﾙ =ｱ ｱ ｼ ﾅ ｲ = # | |
|
Listening to all of the recorded messages
Press(Replay/Record).
After the messages are played back, the following will be displayed.
■To erase the messages, press 
.
ｻ ｲ ｾ ｲ ｼ ﾀ ﾖ ｳ ｹ ﾝ ｼ ｮ ｳ ｷ ｮ
■ To save the messages, press 
. ｽ ﾙ =ｱ ｱ ｼ ﾅ ｲ = #
Erasing a specific message
Press | (Erase) while listening to the message you |
want to erase, then press 
.
Erasing all of the recorded messages
1 Press | (Erase). |
ｽ ﾍ ﾞ ﾃ ｾ ｼ ｮ ｳ ｷ ｮ ｼ ﾏ ｽ ｶ ?
2ﾊ ｲ =ｱ ｱ ｲ ｲ ｴ = #
Press .
Operating the answering device from a remote location
light on/flash
Preparation: Programming the remote operation ID
1.Press 
(Function/Edit).
2.Press 
.
3.Enter any 
and # cannot be used.
Example : ｱ ﾝ ｼ ｮ ｳ ｱ No. =1234
ｱ ｱ ｱ [ 4 ｹ ﾀ , ﾄ ｳ ﾛ ｸ ] ｵ ｽ
4.Press 
(Set).
5.Press 
(Stop) to exit the program.
Operation: Listening to a recorded message from a remote location
Turn the 
(Auto answer) light on before you go out. Remote operations are available only from a touch tone telephone.
1.Call your unit.
2.Enter the remote operation ID during the greeting message.
3. Press 2 or wait 4 seconds.
●Only the new recorded messages will be played back.
● To listen to all the recorded messages, press 4 after the new messages have been played back.
18
