Display, Preparation | Panasonic KX-T2375SUW manual

PQQX13163ZA-BM02 02.6.19 2:11 PM ページ 5

Display

(This display shows all of the possible conﬁgurations.)

: In the standby mode, the display shows the current time. (Ex. 12:00AM)

: During a conversation, the call duration is displayed. (Ex. 2 hours, 14 minutes, 30 seconds)

: (FLASH) was pressed.

: (PAUSE) was pressed while storing phone numbers.

: ($) was pressed while dialing.

: (#) was pressed while dialing.

: (AUTO/LOWER) was pressed (p. 16, 19).

: (MUTE) was pressed during a conversation (p. 22).

: The unit plays music during the hold for a caller.

: The unit is in the clock setting mode.

: The unit is in the programming mode (p. 8).

: The dial lock mode is set. To cancel the mode, see page 25.

: This display ﬂashes, when the battery power is low. To replace the batteries, see page 29.

Preparation

Page 5

Image 5

Panasonic KX-T2375SUW operating instructions Display, Preparation

Contents

Basic Operation Advanced Operation Useful Information PreparationModel No. KX-T2375SUW Operating Instructions Before Initial Use Accessories includedFor your future reference Thank you for purchasing your new Panasonic integrated telephone Location of Controls Display Settings Installing the Batteries ContentsConnecting the Handset/Telephone Line Cord Connecting a Communication Device Programming Summary of Preparations Location of Controls VOLUME Display Installing the Batteries SettingsConnecting the Handset/Telephone Line Cord After connection, lift the handset to check for a dial tone Connecting a Communication Device Make sure that a call is not put on hold “ SettingsProgramming Summary of Preparations 5 Press PROGRAM. ≥A long beep sounds Selecting the Dialing Mode You can select AM/PM or 24-hour clock by programming Time AdjustmentPress MUTE Press Press # to select AM, PM or 24-hour Selecting the Ringer Volume Setting the LCD Contrast Wall Template Wall Mounting Making Calls Using the speakerphoneBasic Operation To redial the last number dialed If using the speakerphone, press SP-PHONE/HEADSET To increase, press VOLUME . To decrease, press VOLUME“ Making Calls To put a call on hold Answering Calls Using the speakerphoneTalk into the MIC microphone To hang up, press SP-PHONE/HEADSET Storing Phone Numbers in Memory Speed DialerYou can store up to 10 phone numbers in memory. The dialing buttons Enter a phone number, up to 22 digits To erase a stored number Dialing a Stored Number9 for the phone number to be erased Press one of the one-touch auto dial buttons One-Touch DialerTo store in an UPPER memory location PROGRAM and start again from step To store in a LOWER memory location From an UPPER memory location “ One-Touch DialerOR From a LOWER memory location Memory card For Call Waiting Service Users Special FeaturesHow to Use the PAUSE Button For Rotary or Pulse Service Users Muting Your Conversation “ Special FeaturesTurning Music Played During the Hold ON/OFF Press MUTE while talking Selecting the ﬂash time FLASH Button Setting the PIN Code Dial Lock To cancel the dial lockTo set the dial lock Enter the PIN code p Enter the PIN code p. 24. Ex. Your PIN code is “1234” Call RestrictionTo set the call restriction Connecting the Optional Headset to the Unit Using the Optional HeadsetTo cancel the call restriction Make sure to install the batteries “ Using the Optional HeadsetTo adjust the headset receiver volume 4 levels While using the headset, press VOLUME or Battery Replacement Before Requesting Help ProblemRemedy Useful Information Safety InstructionsInstallations Environment Placement 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PQQX13163YA F0701-1112 D