Panasonic KX-T2375SUW operating instructions Before Requesting Help, ProblemRemedy

PQQX13163ZA-BM04 02.6.19 2:13 PM ページ 30

Before Requesting Help

ProblemRemedy

The unit does not work.

≥Check the settings (p. 6–12).

≥Remove the batteries and reinstall them to reset the unit.

The unit does not ring.

≥The RINGER selector is set to OFF. Set to HIGH or LOW (p. 11).

You cannot dial.≥Check that the dialing mode selection is correct (p. 9).

≥Dial lock mode is set. To cancel the mode, see page 25.

≥The dialed number is restricted. To cancel, see page 27.

The other party suddenly	≥(MUTE) may have been pressed during
cannot hear your voice	the conversation. If “	” is displayed,
during a conversation.	press (MUTE).

You cannot program items ≥Programming is not possible when a

such as the dialing mode. call is put on hold.

≥Do not pause for over 60 seconds while programming.

You cannot store a phone number in memory.

≥Programming is not possible when a call is put on hold.

≥Check that the batteries are installed in the unit and that the battery power is not low.

≥Do not enter a phone number more than 22 digits long.

While programming, the unit starts to ring and stops the program.

≥To answer the call, lift the handset or press (SP-PHONE/HEADSET). Start again from the beginning after hanging up.

You cannot redial by	≥If the last number dialed was more
pressing (REDIAL).	than 32 digits long, the number will not
	be redialed correctly.
Previously programmed	≥If the batteries installed in the unit
information is erased.	expire, programmed information may
	be erased. Reprogram if necessary.

30