1 Press (FUNCTION/EDIT).
While the arrow points to “Save | |
2 directory”, press | OK (Yes key). |
•The display shows the number of stored items in the directory.
3 Enter a name, up to 15 characters, with the dialling buttons, (*) (←) or (#) (→).
•See the steps for entering names and symbols (p. 26).
•If a name is not required, press 
OK (Next key) and go to step 5.
HSave directory
Ringer volume
GF HOK=Yes
Directory= 0 item
Enter name
#=←→ HOK=Next
Enter name Tom Jones
#=←→ HOK=Next
4 Press 
OK (Next key).
5 Enter a phone number up to 22 digits.
•Each time you press 
the digit to the left of the cursor is erased.
6 Press 
OK (Save key).
•A beep sounds.
•The display will return to step 1. You can continue storing other items after pressing 
OK (Yes key).
•To return to the standby mode, press
(EXIT/CH).
Enter phone no.
0987654321
HOK=Save
Tom Jones 0987654321
Advanced Operation
•If a pause is required for dialling, (PAUSE) can be stored in a phone number counting as one digit (p. 33) in step 5.
•You can exit the programming mode any time by pressing (EXIT/CH).
•If the display shows “Memory is full” in step 2, the display will return to step 1. Press (EXIT/CH), and erase other stored items from the directory (p. 32).
25
