For Australia Users:
•You can access Telstra’s “EASY CALL” service by having the recall time set at 100 msec, and then follow Telstra’s “EASY CALL” instructions to operate this service.
•If you are connected via a PBX, a longer recall time may be necessary to use PBX functions (transferring a call etc.). Consult your PBX installer for the correct setting.
For New Zealand Users:
•The recall setting of this telephone is not to be adjusted below 300ms for use on the Telecom Network.
•The recall facility of this product may not always operate correctly on some parts of the Telecom network or on some PABX’s available on the market. If this is the case then “recall” can be activated by “flashing” the
RECALL PROBLEMS WITH THIS PRODUCT ARE NOT TO BE REPORTED TO TELECOM FAULTS SERVISE.
Advanced Operation
35
