Manuals / Panasonic / Communications / Telephone

Panasonic KX-TC1105ALB, KX-TC1105ALN Before Requesting Help, Problem, Remedy, Useful Information

Models: KX-TC1105ALB

1 48

Download 48 pages 10.13 Kb

Page 39

Before Requesting Help

Before Requesting Help

Problem	Remedy

“Out of range” is displayed	• You are too far from the base unit.
and an alarm tone sounds.	Move closer and try again.
	• Place the handset on the base unit and
	try again.
	• Plug in the AC adaptor.
	• Extend the antennas fully.

The unit does not work.	• Check the settings (p. 8–10).
	• Charge the battery fully (p. 9).
	• Clean the charge contacts and charge
	again (p. 10).
	• Install the battery properly (p. 9).
	• Place the handset on the base unit and
	unplug the AC adaptor to reset.
	Plug in, and try again.
	• Re-install the handset battery within
	3 minutes to avoid memory loss and
	place the handset on the base unit.
	Then try again.
	• This unit is not designed to be used
	with rotary (pulse dialling) services.

Static, sound cuts in/out, fades. Interference from other electrical units.

•Locate the handset and the base unit away from other electrical appliances (p. 3).

•Move closer to the base unit.

•Extend the antennas fully.

•Press (EXIT/CH) to select a clearer channel.

The handset does not ring. • The ringer volume is set to OFF. Set to HIGH or LOW (p. 12).

The handset display is blank			• Charge the battery fully (p. 9).
even after pressing	,	,

or OK.

Useful Information

39

Image 39

Panasonic KX-TC1105ALB, KX-TC1105ALN operating instructions Before Requesting Help, Problem, Remedy, Useful Information

Contents

Preparation Basic Operation Advanced Operation Useful Information PLEASE READ BEFORE USECaller ID Compatible AND SAVEThank you for purchasing your new Panasonic cordless telephone Accessories includedBefore Initial Use For your future referenceBattery Charge For Best PerformanceBase Unit Location Advanced Operation ContentsPreparation Basic OperationPreparation Location of ControlsHandset Base unit0211115555 DisplayThis display will be shown when -the Caller List is empty 0266667777Preparation Connections SettingsBattery strength Installing the Battery in the HandsetBattery strength Battery ChargeSettings Battery informationRecharge During programming Programmable FunctionsPreparation Make sure that the unit is in the standby modeProgrammable Functions Selecting the Ringer VolumeGF HOK=Save Setting the Auto Talk Feature4 points to “Talk switching” HProgram GF HOK=Yes HTalk switching GF HOK=Yes Auto talk OffIf noise interferes with the conversation 1112222Making Calls To redial the last number dialledOperation To select the receiver volumeTo dial after confirming the entered number To redial after confirming the last number dialledAnswering Calls Caller ID ServicePrivate name display How caller information is displayed when a call is received021111555 Basic OperationViewing the Caller List Using the Caller ListTo exit the Caller List Ex. When you search from the most recent callBasic Operation To return to the previous callerUsing the Caller List 0234567890Calling Back from the Caller List Basic Operation Editing the Caller’s Phone Number5 new calls G=New F=Old 0276543210HSave directory Clear GF HOK=Yes Enter name #=←→ HOK=Save Enter name Storing Caller List Information in the Directory10 new calls G=New F=Old “Save directory”, pressBasic Operation Erasing Caller List InformationTo erase a specific caller from the Caller List To erase all entries in the Caller ListStoring Names and Numbers in the Directory Using the DirectoryEnter phone no 0987654321 HOK=Save Tom Jones HSave directory Ringer volume GF HOK=Yes Directory= 0 item Enter name2 directory”, press #=←→ HOK=Next Enter name Tom Jones #=←→ HOK=NextSteps for Entering Names and Symbols Using the DirectoryIf you make a mistake while entering a name Enter phone no For example, to enter “Tom Jones”Directory= 20 items Enter name #=←→ HOK=Next T To Tom Tom Tom J Tom Jo Tom Jon Tom Jone Enter name Tom Jones #=←→ HOK=NextEXIT/CH Finding Items in the DirectoryUsing the Directory Symbol NumberTo search for a name by initial Using the Directory 4567890Dialling from the Directory FrankAdvanced Operation Jane HEdit Clear GF HOK=Yes Enter name Jane #=←→ HOK=NextEnter name Jane Walker #=←→ HOK=Next 1234567 HOK=Save 0981234567 HOK=Save Jane WalkerUsing the Directory Erasing an Item from the DirectoryHelen HEdit Clear GF HOK=Yes Edit HClear GF HOK=Yes ClearCall Waiting and Caller ID Compatible Special FeaturesHow to Use the PAUSE Button 0266667777Special Features RECALL ButtonSelecting the recall time Advanced Operation You can access Telstra’s “EASY CALL” service by having the recall time set at 100 msec, and then follow Telstra’s “EASY CALL” instructions to operate this serviceBattery Replacement Screws 4 cm To Telephone Plug and Socket Wall MountingWall Template Useful InformationOptional Telephone Doulble Adaptor Adding Another PhoneStandard Telephone To socketUseful Information ProblemBefore Requesting Help RemedyBefore Requesting Help ProblemRemedy Useful Information “Recharge battery” isProblem RemedyPlacement Safety InstructionsSafety Installations EnvironmentThis equipment has been tested and found to comply with AS/NZS Useful InformationInstructions to customer For Australia only Important InformationUseful Information Service difficultiesImportant Information For New Zealand Users OnlyWARNING NOTICE Page 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PQQX12819ZA-BM WM0800ST0Printed in Malaysia