Using the Caller List
Storing Caller List Information in the Directory
You can store phone numbers that are in the Caller List into the directory.
Make sure that the unit is in the standby mode.
1 Press 
or 
OK to enter the Caller List.
10 new calls
G=New F=Old
2 Press 
or 
repeatedly to find the caller you want to store in the directory, and press 
OK.
•If the number requires editing, see page 21.
3 | While the arrow points to |
|
“Save directory”, press | OK (Yes |
key).
a)If a name is not required, press 
OK (Save key).
b)If a name is required, enter the name
(p. 26). When finished, press 
OK (Save key).
•A beep sounds.
•The display will return to step 2. You can continue storing other items.
•To return to the standby mode, press
(EXIT/CH).
0234567890 11:20A JAN12 ⋅ 3
HSave directory Clear
GF HOK=Yes
Enter name
#=←→ HOK=Save
Enter name
CINDY TURNER 
#=←→ HOK=Save
•You can exit the programming mode any time by pressing (EXIT/CH).
•If the display shows “Memory is full” in step 3, the display will return to step 2. Press (EXIT/CH) to exit the list.
To erase other stored items from the directory, see page 32.
•You cannot store caller information in the directory if a phone number is not displayed.
22
