Panasonic KX-TC1220ALW Selecting the recall time, Points to Set recall, Desired time is displayed

Selecting the recall time

The recall time depends on your telephone exchange or host PBX.

You can select the following recall times: “700, 600, 400, 300, 250, 110, 100 or 90 msec (milliseconds)”. KX-TC1220ALW comes from the factory set to “100 msec” and KX-TC1220NZW comes from the factory set to “600 msec”. Make sure the unit is in the standby mode initially.

1	Press (FUNCTION/EDIT).
	Press Ö or Ñ repeatedly until the arrow
2 points to “Program”.
3	Press á (Yes key).
4	Press Ö or Ñ repeatedly until the arrow
	points to “Set recall”.
5	Press á (Yes key).
6	Press Ö or Ñ repeatedly until the
	desired time is displayed.
7	Press á (Save key).
	•A beep sounds.

•To return to the standby mode, press (EXIT/CH).

HProgram

GF H=Yes

LCD contrast HSet recall

GF H=Yes

Advanced

•You can exit the programming mode any time by pressing (EXIT/CH).

•Users in Australia can access Telstra’s “EASY CALL” service by having the recall time set at 100 msec (this is the factory default setting), and then follow Telstra’s “EASY CALL” instructions to operate this service.

•If you are connected via a PBX, a longer recall time may be necessary to use PBX functions (transferring a call etc.). Consult your PBX supplier for the correct setting.

For Call Waiting Service Users in New Zealand

Make sure the recall time is set to 600 msec for use with Telecom’s Call Waiting Service. Press (RECALL) if you hear a call-waiting tone while talking.

•The first call is put on hold and you can answer the second call.

•To return to the first caller, press (RECALL) again.

•Your telephone company may not support the second caller display feature.

Operation

49