Panasonic KX-TC1220ALW To check the time and date, For Caller ID service users p

8	Press á (Next key).
9	Enter the current date by using a 4-digit
	number.
	(Ex. To set Dec. 27, enter “2712”.)
10	Press á (Save key).
	•A beep sounds.

•The clock starts working.

09:30P 01.01 Enter day.month

H=Save

09:30P 27.12 Enter day.month

H=Save

09:30P 27.12 2001

Preparation

•You can go back to the previous display by pressing Ü, when setting the time and date.

•If 3 beeps sound when entering the time and date, a wrong number was entered. Enter the correct time and date.

To check the time and date

You can check the current time and date in the standby mode.

Lift the handset off the base unit and press /(EXIT/CH) twice.

OR

When the handset is off the base unit, press /(EXIT/CH) once.

•The current time and date is displayed for 30 seconds. To return to the standby mode, press /(EXIT/CH).

ON

OFF

TALK

FUNCTIONEDIT

1 2

4 5

INTERCOM

EXITCH 3

6

/(EXIT/CH)

If a power failure occurs, you have to readjust the time and date. If you use the handset for making/answering calls or remote operation without adjusting the time and date, the display in step 1 appears for 5 seconds after “Off” is displayed.

For Caller ID service users (p. 27)

•The Caller ID information will re-set the clock after the first ring if the adjusted time and/or date is incorrect. However, if the time has not previously been set, the Caller ID information will not adjust the clock.

•The caller ID information will automatically adjust the clock for daylight saving time.

15