Panasonic KX-TC1220ALW Editing the Caller’s Phone Number, To add a number, To erase the number

Using the Caller List

Editing the Caller’s Phone Number

You can edit a phone number in the Caller List. After editing the number, you can continue with calling back or directory storing procedures.

Make sure the unit is in the standby mode initially.

1	Lift the handset off the base unit.
	OR

If the handset is off the base unit, press Ü or á to enter the list.

2 Press Ö or Ñ repeatedly to find the desired caller.

5 new calls

G=New F=Old

0355566677 11:20A 20.12 √

3 To add a number

Add a number to the current number using the dialling buttons

((0) to (9)).

.

•If you misdial, press Ü and dial again.

To erase the number

Press (FUNCTION/EDIT), then press Ü to erase the digit.

•You can also add a number if required.

4 After editing the number, you can continue with calling back or storing procedures.

To call back, press (TALK) (p. 31).

To store the number in the directory, press á and follow the instructions on the display (see page 33, from step 3).

•If the phone number does not include the area code (which is the same as your

area code, p. 20), you can view the original number (area code + phone number) by pressing (FUNCTION/EDIT) again in step 3.

•The number edited in step 3 will not be maintained in the Caller List.

For New Zealand Users:

Your telephone company may charge you for a local call if the number dialled has the area code prefix included. If the charge for local call is unacceptable, only the 7-digits of the local number should be dialled from your telephone. Do not dial the “0” prefix or the area code digit.

32