Storing Caller List Information in the Directory
You can store names and phone numbers that are in the Caller List into the directory. Storing must be carried out with the handset.
Make sure the unit is in the standby mode initially.
1 | Lift the handset off the base unit. |
OR | |
| If the handset is off the base unit, |
| press Ü or á to enter the list. |
2 Press Ö or Ñ repeatedly to find the caller you want to store in the directory, and press á.
3 Press Ö or Ñ to select “Save directory”, and press á (Yes key).
When the caller’s name is not displayed in the Caller List:
a)If a name is not required, press á (Save key).
b)If a name is required, enter the name (p. 39). When finished, press á (Save key).
•A beep sounds.
•To continue storing other items, repeat from step 2.
•To return to the standby mode, press (EXIT/CH).
10 new calls
G=New F=Old
0355566677 11:20A 20.12 ✕3
HSave directory Clear
GF H=Yes
Enter name
#=←→ H=Save
Enter name
CINDY TURNER
#=←→ H=Save
CINDY TURNER 0355566677
Basic Operation
•You can exit the programming mode any time by pressing (EXIT/CH).
•If the display shows “Memory is full” in step 3, press (EXIT/CH) to exit the list. To erase other stored items from the directory, see page 44.
•After the maximum of 30 items has been stored, “Memory is full” is also displayed.
•You cannot store caller information in the directory if a phone number is not displayed.
33
