13
Preparation
Selecting the Line Mode
If the line is connected to a low voltage system such as a PBX, set to “B”.
Otherwise the unit may not ring and a second caller’s information may not
be displayed (p. 43). Your phone comes from the factory set to “A”.
Make sure the handset is in the standby mode.
1Press (FUNCTION/EXIT/CH).
2Press (›) or (‹) repeatedly until the arrow
points to “Program”.
3Press FWD/EDIT (fl) (Yes key).
4Press (›) or (‹) repeatedly until the arrow
points to “Set line mode”.
5Press FWD/EDIT(fl) (Yes key).
6Press (›) or (‹) to select “B” or “A”.
Press FWD/EDIT (fl) (Save key).
≥A beep sounds.
≥To return to the standby mode, press
(FUNCTION/EXIT/CH).
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
1
Save directory
Ringer volume
43
1
=Yes
1
Program
43
1
=Yes
1
Save DIRECT#
Set recall time
43
1
=Yes
1
Set line mode
Talk switching
43
1
=Yes
Line mode :A
43
1
=Save
Line mode :B