INSTALLATION
6Set the Clock.
The screen displays the time (the default setting is 12 AM). To correct the setting, use Cor cto correct the hour, then select NEXT to move to the minutes setting; repeat to select AM or PM. Select DONE when the correct time is displayed.
7Set the Date.
The screen displays the date (the default setting is 1/04/98). To correct the setting, use Cor cto correct the month, then select NEXT to move to the day and the year. Select DONE when the correct date is displayed.
You must set the date for the answering system once so that the day announced with your messages is correct. This information is stored so that even when the time is lost because of a power failure, the time, date, and day will be set correctly with the first incoming call received after the power returns.
8Adjust Display Contrast.
You can adjust the contrast of the display to one of eight levels. Press Cor cuntil the screen displays your desired setting. Select OK to save.
9Set Dial Mode.
This product comes set for touch tone dialing; if you have touch tone dialing service, you do not need to set this feature. If you have pulse dialing service, you cannot dial numbers with the phone set to touch tone. The current selection is displayed. Select CHANGE to switch to PULSE (dial pulse/rotary), then use the softkey to select OK.
10Record Outgoing Announcement.
•When the screen displays Announcement, use the softkey to select RECORD. Speak toward the unit in a normal tone of voice, without any background noise, to record the announcement callers will hear when the answering system answers a call. You can record an outgoing announcement up to three minutes long.
•When you are finished recording, use the softkey to select STOP.
•If you choose not to record an announcement, the system will play a
6