AT&T 1760 Connect with the Answering System, Play Messages, Connect with the answering system

ANSWERING SYSTEM OPERATION

FROM A REMOTE TOUCH TONE PHONE

Connect with the Answering System

1Dial your telephone number from a touch tone phone with a different telephone number.

2When the system answers, enter your three-digit Remote Access Code during or after the announcement. The system announces the number of messages, then beeps twice. If the announcement continues to play after you enter your code,

wait for the announcement to end, then re-enter the code

— OR —

Press #to stop the announcement, then re-enter the code.

3The two-beep signal lets you know the system is ready to accept a remote command.

Play Messages

1Connect with the answering system.

2After the two beeps, wait four seconds, and the system plays back messages

— OR —

Press 1to play all messages

— OR —

Press 2to play only new messages (if there are no new messages, the system announces,“No new messages”).

3To repeat a message — Press 4while the message is playing.

To repeat part of a message — Hold down 4. To resume playing, release 4. To skip a message — Press 6while the message is playing.

To skip part of a message — Hold down 6. To resume playing, release 6. To stop message playback — Press 5.

To save messages, hang up.

18